Polaris Pro Riders
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Brandon13buckley

Registered:
Posts: 117
Reply with quote  #1 
I,m having a problem with my predator, i just had all the valves replaced and a new piston and cylinder, it starts fine but once started its idle eradicates and there is plenty of gas coming out of the clear lines on the bottom of the carburetor. I currently have a je 11.0.1 comp piston k&N drop in filter, and big-gun slip on the engine seems to get flooded and want to rev up, when i had the gas shut off it was more conservative and the idle did not eradicate so much there is also gas shooting back out of the carb and the clearances are all in spec for the valves we triple checked. I recently replaced the main jet with a 160 main and am running the dynojet needle is there any advice you guys could give me? Thanks, Brandon
Brandon13buckley

Registered:
Posts: 117
Reply with quote  #2 
and i should add the predator hasnt been ran for a long period of time since one year ago.
Brandon13buckley

Registered:
Posts: 117
Reply with quote  #3 
Just changed the clip on the needle and no more flooding or crazy idleing also let it run for a while this time which probably also helped quite a bit
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.