Polaris Pro Riders
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
mad quadder

Registered:
Posts: 10
Reply with quote  #1 
So I just blew out my 2nd rear wheel hub in the last 3 months. Just got it apart and measured the splines and both measure 1" and spline depth at 80ths. Does anyone know if that is in spec.  Is there any other wheel hub that will fit with the same lug pattern?  Any help would be greatly appreciated thks.
LEOGM5150

Avatar / Picture

SITE OWNER
Registered:
Posts: 15,429
Reply with quote  #2 
Rath racing made some solid billet wheel hubs I used to use on my predator and outlaw and they were indestructible.
__________________
FROM: POWELL WYOMING USA

MY GREATEST FEAR IS THAT WHEN I DIE MY WIFE WILL SELL MY TOYS FOR WHAT I TOLD HER I HAVE INTO THEM...

2014 POLARIS RZR 4 900 EPS
2012 POLARIS RZR 4 900 XP
2008 POLARIS RZR 800
2008 POLARIS OUTLAW 525S LE
2007 POLARIS OUTLAW 525 IRS
2000 400 RCR TWO STROKE SCRAMBLER
2001 400 TWO STROKE SCRAMBLER
2005 SKI DOO 1000 TWO STROKE SAND SLED
mad quadder

Registered:
Posts: 10
Reply with quote  #3 
Thks for the quick reply Leo. I'll check out the rath hubs.
Team Bricktucky

Avatar / Picture

Registered:
Posts: 2,071
Reply with quote  #4 
that is a odd problem you have , I have never stripped a stock wheel hub. make sure your axle nut is really tight and torqued down . I have stripped a team firestick hub but the bolt kept coming loose and the washer behind the nut cupped into the hub. but the oem hubs do not have the tapper on the outside of the hub like a firestick has. I'm wondering if maybe your hub nuts and washer were bottomed out before they tightend the hub against the axle tapped on the inside .
the rath hubs are very nice and the set I have are over 10 years old , on one of my two predators. I hope rath still sells those hubs. he has dumped a lot of predator and outlaw products.
mad quadder

Registered:
Posts: 10
Reply with quote  #5 
Yeah rath still has them listed on their website but at 260$ a set the wife would choke me in my sleep with all the money I've been dumping into this getting it ready for the perry opener in Ohio April 1st. I got a stock 05 hub off of eBay 60 bucks got it on and all torque  down.  Haven't had a chance to get out on it yet so hopefully this hub holds up. 
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.